For certain consumer products, mechanical safety is a major concern, and protecting people, animals, and property from damage is receiving increasing attention worldwide, especially in the growing European market. For manufacturers who want to sell their machinery products in the European Union (EU), applying for the CE certification mark is used to indicate that their products have passed the required tests according to their type and nature of use. In order to obtain the CE certification mark, a company may need to spend a lot of time, manpower, financial resources and energy to understand the corresponding regulations so that its products meet the basic health and safety requirements specified in machinery regulations.
Shenzhen Zhongjianlian Testing Technology Co., Ltd. is an authoritative certification company focusing on CE certification of machinery and equipment. The company has obtained a number of institutions such as the European Union ECM (Announcement No. 1282), IEST (Announcement No. 0865), UDEM (Announcement No. 2292) Authorized by the machinery MD standard, the certificate report has been recognized and trusted by many countries around the world.
To be precise, what is EU Machinery Directive? By definition, Machinery Directive (2006/42 / EC) applies to institutions, mobile machinery, mechanical devices, machines used to lift and transport people, and safety accessories. The basic health and safety requirements (EHSR) stipulated in the regulations cover the entire field of mechanical engineering, which is an extremely important aspect of industrial society.
Machinery regulations apply to the following products:
* Ring-connected components
* At least one moving part
* Regulator, control and main circuit
* Materials processing, handling, handling and packaging
* Several machines work in conjunction
* Interchangeable equipment
* Hazards not covered by the Low Voltage Directive
* Not covered by other directives
The Machinery Directive stipulates that for machinery products and safety components that belong to Appendix IV, the certification body must perform CE type testing. This catalog defines and includes all types of products related to this directive:
machine:
* Circular saw, sawing machine
* Surface planer suitable for manual feed of woodworking
* Planer for unilateral trimming
*band-saw
* Combined wood processing machine
* Manual tenoning machine
* Manual vertical axis casting machine
* Convenient Chain Saw
* Stamping machines, including presses for cold working of metals
* For plastic and rubber stamping machines
* Machines for underground work: machines for railway tracks, hydraulic powered lifts, internal combustion engines
* Household garbage manual loader with compression mechanism
* Protection equipment and detachable drive shaft with universal joint
* Car lifting equipment
* Equipment used to lift people with the risk of falling from more than 3 meters
* Machine used to make pyrotechnics
Safety parts:
* Inductors (non-contact induction protection devices, shielding, electromagnetic probes, gratings, etc.)
* Two-handed / two-person control operation device
* Automatic removable screen
* Anti-tip protection device
* Protection against falling objects
CE certification product safety labeling main steps:
(1) Design the product to meet the requirements of relevant product safety standards
(2) Establish technical documents (TCF) (that is, specific information displayed to confirm that the product has complied with the basic safety requirements of the relevant directives of CE certification)
(3) Implementation of quality assurance system
(4) Perform verification by an approved certification body or sign a self-declaration of conformity declaration (certain specific products must be approved by an approved certification body before the CE certification mark can be attached)
(5) CE marking attached
The company's industrial machinery CE certification services:
1. Interpretation of relevant product safety instructions and standards, evaluate applicable product safety instructions and standards, and explain the requirements of relevant product safety instructions and standards.
2. Product safety standard review and amendment recommendations, based on the basic health and safety requirements of relevant directives (machinery directives, etc.) and actual review of relevant product safety standards, your company's products and proposed amendments, and write the results of the review report;
3. Product risk assessment and countermeasure report, write product risk assessment and countermeasure report according to EN1050;
4. Assist in confirming and editing related technical information of the product: mechanical drawings, specification tables, mechanical structure drawings, safety device labels, circuit diagrams and electrical component tables, oil / air pressure diagrams and oil / air pressure component tables, operation manuals, etc .;
5. Perform relevant tests at the factory site: mechanical safety structure inspection, electrical safety test, noise test and other items;
6. Confirm the verification samples, counsel the manufacturers to prepare verification samples according to the requirements of the standard, and confirm the compliance of the verification samples.
7. Editing and writing of CE safety technical documents (TCF), including: product function and feature description, series product difference comparison description, quality assurance system description, CE certificate of conformity, applicable directives and standards description, basic health of machinery directive Conformity check report with safety requirements, product risk assessment and countermeasure report, relevant product safety standard compliance report, relevant safety standard test report, noise test report;
8. Assist in establishing correct and complete CE declaration of conformity;
9, confirm the lack of verification personnel and confirm the direction of product correction;
10. Confirm the product correction status;
11. The product passed the verification and obtained the certificate;
12.Other services (optional): technical drawing drawing, warning sign generation, technical drawing translation service, instruction manual preparation, operation and maintenance manual preparation, instruction manual preparation translation service, operation and maintenance manual preparation translation service, related English standard translation service (English) Translating).